Fused Deposition Modeling (FDM), also known as FFF (Fused Filament Fabrication), is the most accessible and cost-effective 3D printing technology. Ideal for prototyping, concept models, and large-format parts with a wide range of thermoplastic materials.
FDM (Fused Deposition Modeling) works by extruding molten thermoplastic filament layer by layer through a heated nozzle. As the material cools, it fuses to create solid parts. This technology is known for its reliability, cost-effectiveness, and wide material availability.
FDM is the most widely used 3D printing technology, making it ideal for rapid prototyping, concept models, and production parts where surface finish is less critical than function and cost.
Bio-derived from corn starch. Easy to print, good surface quality, ideal for concept models and low-stress applications.
Engineering-grade plastic with good impact resistance and heat tolerance. Widely used for functional prototypes.
Combines ease of printing with good mechanical properties. Water-resistant and food-safe options available.
Flexible, rubber-like elastomer. Ideal for gaskets, seals, protective cases, and wearable devices.
High strength and heat resistance. Suitable for functional parts requiring durability.
High-performance engineering plastic. Excellent thermal and chemical resistance for demanding applications.
| Parameter | Specification |
|---|---|
| Layer Resolution | 100 - 300 microns |
| Dimensional Tolerance | ±0.2mm to ±0.5mm |
| Minimum Wall Thickness | 1.2mm (recommended 2.0mm) |
| Maximum Part Size | Up to 500 x 500 x 600mm |
| Surface Finish | Layer lines visible, matte finish |
| Lead Time | 48 - 72 hours |
Lowest cost per part among 3D printing technologies. Ideal for budget-conscious projects.
From basic PLA to engineering-grade PEEK, choose the material that fits your requirements.
Print bigger parts than most other technologies. Ideal for concept models and large prototypes.
Sanding, painting, and acetone smoothing available for improved aesthetics.